Finding the network controller board firmware version

Finding the network controller board firmware version on the Baytech is not intuitive, and can easily be confused with the serial controller board firmware version. In the following sample session, the network controller board firmware revision number is noted in red.

telnet 10.10.1.202 ──(Mon,Jun18)─┘
Trying 10.10.1.202...
Connected to 10.10.1.202.
Escape character is '^]'.

Universal RPC login:

Universal RPC login: root
Password:

BAYTECH

For further information check:
http://www.baytech.net/

RPC-3/4(A)DE Series
(C) 2004 BayTech
F1.07

Option(s) Installed:
True RMS Voltage
True RMS Current
Internal Temperature

Internal Temperature: 88.7 F

Switch 1: Open 2: Open

1)...Outlet 1 : On
2)...Outlet 2 : On
3)...Outlet 3 : On
4)...Outlet 4 : On
5)...Outlet 5 : Off
6)...Outlet 6 : On
7)...Outlet 7 : On
8)...Outlet 8 : Off

Type Help for a list of commands
<================= this is where the ;;;;;; is entered
RPC-4>
Module: 1
Attention Character: ;
Outlet Control..................1
Status..........................S
Configure.......................C
Unit Reset......................RU
Logout..........................T
Enter Request :C

Copyright(C) Bay Technical Associates 2006
URPC Ethernet Host Module
Revision F 2.11.02 Module 1
Hardware 1.01 Serial number 3320241 colilo version 1.05.01

Status..........................1
Serial Port Configuration.......2
Serial Port Device Name.........3
Attention Character.............4
Disconnect Timeguard............5
Connect Port ID Echo............6
Login Setup.....................7
Network Port Configuration......8
Module Name.....................9
RPC Management.................10
Firmware / Config Download.....11
Exit............................X,CR

Enter Request :

External Power Controllers: Configuration and Management

Finding the network controller board firmware version

Related Articles